Tolerances

Tucker Engineering, Inc. Tolerances

Tolerances on this sheet to supercede TEI Heatsink Drawings tolerance blocks unless otherwise specified
Dimension 'A' (inches)	+/- Tolerance on 'A' Diameter of Extrusion Die Up to 10 Inches	Over 10 Inches
< .125	.006	.014
.125-.249	.007	.015
.250-.499	.008	.016
.500-.749	.009	.017
.750-.999	.010	.018
1.000-1.499	.012	.019
1.500-1.999	.014	.024
2.000-3.999	.024	.034
4.000-5.999	.034	.044
6.000-7.999	.044	.054
8.000-9.999	.054	.064
10.000-11.999		.074
12.000-13.999		.084
14.000-15.999		.094
16.000-17.999		.104
18.000-19.999		.114
Flatness: .004(up to .006) inch per inch of width (does not apply to 1" increments) Surface Roughness: 125-64

Click on Image for Home Page

WLn

Tucker Engineering, Inc.